Honda

Used: See Video And Photos For DetailsPart is off a 2022 Honda Trail 125 CT125

Rust Present As Shown In Pictures As Shown In Pictures - Used: See Video And Photos For DetailsPart is off a 2022 Honda Trail 125 CT125

ABS Modulator - Anti-lock brake system hydraulic pump and control module with mounting bracket. Fits 2019-2024 Honda CB300R (CBF300). Structurally sound, no leaks or damage. OEM 57110-K0A-E11.Part is...

Air Cleaner Inlet Duct - Black plastic airbox intake snorkel with rubberized tube. Fits 2019-2024 Honda CB300R, CBF300. Structurally sound, no cracks. OEM 17215-K0A-E10.Part is off a 2024 Honda...

Break in the housing near the intake boot and a crack on the upper section. Airbox - Black plastic air cleaner housing with internal mesh screen. Fits 2019-2024 Honda CB300R / CBF300. OEM...

Bank Angle Sensor - Tip over sensor with mounting bracket and sub-harness. Fits 2019-2024 Honda CB300R (CBF300). Structurally sound, no cracks or damage. OEM 35160-KVS-751.Part is off a 2024 Honda...

Hardware Bolt Set - Miscellaneous collection of OEM fasteners, brackets, hoses, kickstand, horns, and EVAP canister. Fits 2024 Honda CBF300. Structurally sound, normal used condition.Part is off a...

Coolant Reservoir - Black plastic expansion tank with screw-on cap. Fits 2019-2025 Honda CBF300 (CB300R). Structurally sound, no cracks or leaks. OEM 19110-K94-T00.Part is off a 2024 Honda CB300F NA

Engine - Black painted 286cc single-cylinder liquid-cooled motor assembly with clutch and stator covers. Fits 2019-2024 Honda CB300R, CB300F, and Rebel 300 (CMX300). Structurally sound, no visible...

ABS Wheel Speed Sensor - Black plastic sensor with long wire harness and 2-pin connector. Fits 2023-2024 Honda CB300F (CBF300) and CB300R. Tested and functional.Part is off a 2024 Honda CB300F NA

#2 Front Brake Rotor - Wavy style steel front brake disc with 5-bolt mounting pattern. Fits 2019-2025 Honda CBF300, CB300F, and CB300R. Measured at 4.00mm thickness (3.5mm minimum wear limit)...

DAMAGE: Large tear in cover on rear right side. Rider Seat - Black vinyl covered front rider seat with plastic base. Fits 2019-2024 Honda CB300R (CBF300). OEM 77100-K0A-E100.Part is off a 2024 Honda...

Left Handlebar Switch Assembly - Black plastic control pod with integrated turn signal, horn, and high beam/pass switches. Fits 2018-2024 Honda CB300R (CBF300). Includes wiring harness and multi-pin...

Rearset Bracket - Left front driver footpeg bracket in raw aluminum finish with three mounting points and triangular cutout. Fits 2019-2024 Honda CB300R (CBF300). Structurally sound, no cracks or...

Handlebar Risers - Pair of black lower handlebar holders with rubber dampers. Fits 2024 Honda CBF300 (CB300R). Structurally compromised due to bent mounting bolts. OEM 53132-K33-D00.Part is off a...

Handlebar Weights - Pair of black external bar ends with one internal vibration damper weight rod. Fits 2019-2024 Honda CB300R, CB300F (CBF300). Structurally sound, minor surface wear on caps. OEM...

Front Sprocket Cover - Black plastic engine cover that protects the front drive sprocket. Fits 2019-2025 Honda CB300F, CB300R (CBF300). Structurally sound, no cracks.Part is off a 2024 Honda CB300F NA

Lower Triple Clamp - Black painted metal lower steering stem assembly with bearings and hardware. Fits 2019-2024 Honda CB300R (CBF300). Structurally sound, includes lower bearing and top nut. Minor...

ABS Sensor Ring - Pair of front and rear wheel speed sensor pulsar rings. Fits 2019-2024 Honda CB300R, CB300RA, CBF300. Structurally sound, no bends or cracks.Part is off a 2024 Honda CB300F NA

Brake Line Set - Front and rear hydraulic brake hoses with banjo and block fittings. Fits 2019-2025 Honda CBF300, CB300R ABS. Structurally sound, no leaks or cracks. OEM 45125-K0A-E11.Part is off a...