Honda

Rear Brake Master Cylinder - Rear brake master cylinder assembly with 14mm bore, remote plastic fluid reservoir, and rubber hose. Fits 1994-1995 Honda CB1000. Structurally sound, age-appropriate...

Rear Brake Rotor - OEM rear disc brake rotor with black painted center carrier and machined steel friction surface. Fits 1994-1995 Honda CB1000 (Big One). Measured at approximately 5.86mm thickness,...

Rear Inner Fender - Black plastic under-seat mudguard and battery tray assembly. Fits 1993-1996 Honda CB1000. Structurally sound, includes integrated tool storage tray and battery box area. Tool...

Passenger Footpegs - Left and right rear passenger footrests with knurled aluminum grip surface. Fits 1993-1997 Honda CB1000 (Big One) and 1988-1991 Honda NT650 Hawk GT. Structurally sound, no cracks...

Passenger Footrest Stays - Left and right raw aluminum passenger footpeg brackets. Fits 1993-1996 Honda CB1000 (Big One). Structurally sound with no cracks. OEM 50700-MZ1-000, 50750-MZ1-000.Part is...

Cosmetic Wear As Shown In Photos - Turn Signals - Pair of rear indicators with amber lenses and black rubber stalks. Fits 1994-1995 Honda CB1000. OEM 33600-MZ1-771, 33650-MZ1-771.Part is off a 1994...

License Plate Light - Black plastic housing with attached metal license plate mounting bracket and wiring harness. Fits 1994-1995 Honda CB1000. Structurally sound, lens is clear and free of cracks...

Passenger Grab Rail - Cast aluminum silver rear passenger handle with mounting rubbers. Fits 1994-1995 Honda CB1000. Structurally sound, normal used condition with some surface scuffs. OEM...

Rear Sprocket Carrier - Cast aluminum final driven flange with 42T steel rear sprocket and rubber cush drive dampers. Fits 1994-1995 Honda CB1000 (SC30 'Big One'). Structurally sound, normal...

Tail Light - Red lens brake and tail light assembly with rear housing and three mounting studs. Fits 1994-1995 Honda CB1000. Includes wiring harness and 3-pin connector. Structurally sound, lens is...

Tail Fairing Cowl - Black painted ABS plastic rear tail section assembly consisting of the left, right, and center cowl panels. Fits 1994-1995 Honda CB1000 (SC30 / Big One). Structurally sound with...

Cosmetic Wear As Shown In Photos - Rear Wheel - Black 3-spoke cast aluminum rim by Enkei, size 18x5.50. Fits 1993-1996 Honda CB1000 (SC30). Verified straight on balancer. OEM 42650-MZ1-306.Part is...

Regulator Rectifier - Electrical components lot including Shindengen SH261-12 regulator rectifier, starter solenoid relay with 30A fuse, dual horns, rear brake light switch, battery cables, and...

Clutch Cover - Black painted right side engine crankcase cover with internal clutch lifter rod. Fits 1994-1995 Honda CB1000. OEM 11330-MZ1-000.Part is off a 1994 Honda CB1000

Pulse Generator Cover - Black painted aluminum engine cover with central timing hole cap. Fits 1993-1996 Honda CB1000 (SC30). Structurally sound, normal signs of use with minor scuffs on the finish...

Cosmetic Wear As Shown In Photos - Right Side Cover - Gloss black painted ABS plastic side panel with silver CB1000 emblem. Fits 1993-1996 Honda CB1000 (SC30) Super Four 'Big One'. Mounting tabs are...

Shift Shaft - Metal gear shift spindle assembly with return spring. Fits 1994-1995 Honda CB1000, 1990-1996 Honda CBR1000F. Normal used wear, splines are intact. OEM 24610-MS2-610.Part is off a 1994...

Starter Motor - Genuine Mitsuba SM-13 12V unit with 10-tooth splined shaft and mounting brackets. Fits 1993-1996 Honda CB1000 (Big One). Structurally sound, splines are in good condition. OEM...

Transmission & Clutch Set - Internal gearbox assembly including mainshaft with clutch basket, countershaft with gears, shift drum, and shift forks. Fits 1993-1996 Honda CB1000 (SC30). Gears show...

Water Pump - Silver cast aluminum engine cooling pump assembly with integrated drive shaft and multiple hose ports. Fits 1993-1996 Honda CB1000 (SC30). Structurally sound with all mounting points...