Ducati

Right Upper Fairing Cowl - Red side fairing panel with 'Supersport' decal. Fits 2017-2020 Ducati Supersport 939 and 939 S. Structurally sound with all mounting tabs intact, age-appropriate wear. OEM...

Seat - Original rider and passenger seat assembly with red stitching and embossed Ducati logo. Fits 2017-2020 Ducati Supersport 939 and 939 S models. Structurally sound with no tears or cracks; shows...

DAMAGE: One piston has a melted and broken crown edge. Piston & Connecting Rod Set - Pair of engine pistons and connecting rods. Fits 2017-2020 Ducati Supersport 939, Hypermotard 939, and Multistrada...

Shift Fork Set - Complete set of three transmission gear selector forks and two shafts. Includes forks for 1st/4th, 2nd/3rd, and 5th/6th gears. Fits 2017-2020 Ducati Supersport 939, 2016-2018...

Cosmetic Wear As Shown In Photos - Used: See Video And Photos For Details Part is off a 2017 Ducati Supersport

Cosmetic Wear As Shown In Photos - Used: See Video And Photos For Details Part is off a 2017 Ducati Supersport

Starter Motor - Electric engine starter motor. Fits 2017-2020 Ducati Supersport 939 / 939 S, 2016-2018 Hypermotard 939, and various other models including Monster 821/1200 and Multistrada 1200...

Shock bolt seized. Swingarm & Rear Shock - Single-sided swingarm assembly with Sachs rear shock and yellow coil spring. Fits 2017-2020 Ducati SuperSport 939 and 939S. OEM 37021961CB, 36521543A. Part...

Throttle Body Subharness - Injection wiring loom connecting the throttle body assembly and fuel injectors to the main harness. Fits 2017-2020 Ducati Supersport 939 and 939 S. Good working condition,...

Timing Belt Pulley & Idler Set - Complete set of four (4) 20-tooth camshaft timing belt pulleys and two (2) fixed idler/tensioner rollers. Fits 2017-2020 Ducati Supersport 939, Hypermotard 939, and...

Tool Kit - OEM owner's tool kit including red Ducati branded pouch, screwdriver handle, Allen key, and helmet lock cable. Fits 2017-2020 Ducati Supersport 939. Structurally sound, tools show...

Crankshaft Assembly - Complete with Generator Rotor (Flywheel) and Primary Drive Gear. Fits 2018-2023 Ducati Panigale V4, V4S, V4R, and Streetfighter V4. Crankshaft marked '146A2691A', Rotor marked...

Set includes: Main Ignition Switch w/ Harness, Fuel Tank Cap, Seat Lock Cylinder, and 1 Key.; Technically specific to US models due to 'NO ROV' (No Roll Over Valve) gas cap, designed for EVAP...

Plastic battery cover with integrated aluminized heat shielding.; Includes rubber battery retention strap.; Protects the battery from engine/exhaust heat.; Fits Ducati Panigale V4 / V4S / V4R models...

This is the complete OEM airbox assembly, also referred to as an air intake or filter box. The part number 44213212D corresponds to the airbox cover, a major component of this assembly.; Part is off...

This is the lower section of the main airbox assembly. It is made from PA6-GF30, a glass-reinforced nylon.; OEM Pattern Match (Text); Part is off a Good Running 2023 Ducati Panigale V4S , with 5,537...

Official Ducati name: 'BLACKBOX UNIT'.; Technically the Vehicle Control Unit (VCU) or BBS (Black Box System) manufactured by Egicon.; Responsible for processing data for rider aids such as Traction...

Technically a 'Blow-by Hose' or Crankcase Ventilation Hose.; Connects the engine oil separator (Cyclone) to the air intake system.; Features a 90-degree male quick-connect fitting (Norma) and a...

Includes the Engine Oil Pressure Sensor (OEM P/N 53940302A) and the remote mounting hose (OEM P/N 87712481A).; Ready to install. The banjo fitting connects to the engine block, locating the sensor...

Set includes both Left and Right Front Calipers.; Model: Brembo Stylema Monobloc.; COSMETIC MISMATCH DETECTED: The Left caliper (Image 2) features the standard Red 'brembo' logo, while the Right...