Honda

Rear Wheel Rim - 11x7.5AT steel wheel with center hub cap. Fits 1988-2000 Honda TRX300 FourTrax 4x4 and 2WD models using 11-inch rear wheels. Structurally sound with heavy surface rust and oxidation...

Air Cleaner Housing - Air box assembly including case, cover, intake tubes, and internal filter frame. Fits 1988-1992 Honda TRX300 FourTrax 2x4 and 4x4. Structurally sound with normal age-appropriate...

CDI Box - Ignition control module for spark timing. Fits 1988-1993 Honda TRX300 and TRX300FW Fourtrax 300. Genuine OEM part manufactured by Shindengen, features the standard 4-pin and 2-pin connector...

Tear at the front nose with missing upholstery and exposed foam, smaller puncture hole on the rear top surface; Cosmetic Wear As Shown In Photos - Seat Assembly - Black vinyl seat with white plastic...

Mileage: UNKNOWN EXCEMPT; Engine Motor - 282cc air-cooled SOHC single-cylinder engine with integrated 5-speed transmission and 4x4 front/rear output shafts. Fits 1988-2000 Honda TRX300FW FourTrax 300...

Starter Motor - Electric starting motor assembly, 12V, 10-tooth drive gear. Fits 1988-2000 Honda TRX300 FourTrax and TRX300FW 4x4 models. Structurally sound with age-appropriate wear. OEM...

Front Brake Cable - Mechanical cable assembly for front drum brakes. Fits 1988-2000 Honda TRX300 Fourtrax 300 2WD and 4WD models. Includes protective handlebar lever boot and threaded drum-end...

Front Differential - Front final gearcase assembly. Fits 1988-2000 Honda TRX300FW Fourtrax 300 4x4. Structurally sound used condition with typical grime/wear for age. OEM 41400-HC5-770.Part is off a...

Front Propeller Shaft - Center drive shaft connecting the transmission output to the front differential. Fits 1988-2000 Honda FourTrax 300 4x4 (TRX300FW). Features internal splines on both ends and...

Front Drive Shaft Guard - Protective black plastic cover for the front propeller shaft. Fits 1988-2000 Honda TRX300FW Fourtrax 4x4 models. Structurally sound with normal age-appropriate wear; rubber...

Handlebar - Original black steel handlebar assembly. Fits 1988-2000 Honda TRX300 Fourtrax 2x4 and 4x4 models. Structurally sound with age-appropriate wear and surface oxidation. OEM 53100-HC4-000...

Worn through on the outer ends; Cosmetic Wear As Shown In Photos - Handlebar Grips - Pair of black rubber handlebar grips with waffle pattern. Fits 1988-2000 Honda TRX300 Fourtrax. OEM 53165-958-010...

LED Pod Lights - Pair of aftermarket 6-LED rectangular work lights with mounting brackets and wiring. Fits 1990 Honda TRX300 FourTrax and other universal ATV/UTV applications. Includes both front...

Shock Absorber - Pair of front left and right suspension shocks with eyelet mounting. Fits 1988-1992 Honda TRX300 FourTrax 300 (2WD models). Structurally sound with age-appropriate wear and heavy...

All tie rod end boots are torn or cracked; Cosmetic Wear As Shown In Photos - Tie Rods - Pair of front left and right steering tie rod assemblies. Fits 1988-2000 Honda TRX300 Fourtrax 2WD/4WD...

Steering Stem - Steering shaft assembly with lower splines and upper handlebar mounting plate. Fits 1988-2000 Honda TRX300 Fourtrax (2WD and 4WD models). Structurally sound with age-appropriate...

Seized internal components or cables; Cosmetic Wear As Shown In Photos - Carburetor & Cables - Keihin CV carburetor with attached throttle, choke, and brake cables. Fits 1988-2000 Honda TRX300...

Fuel Tank - Steel gas tank assembly with fuel cap and petcock. Fits 1988-1992 Honda TRX300 / TRX300FW FourTrax. Originally finished in Southern Blue, currently painted a faded red/orange. Includes...

Hardware Bolt Kit - Comprehensive set of original chassis and engine mounting hardware including engine mount plates/brackets, castle nuts, various length flange bolts, nuts, washers, springs, and...

Pedal, Gear Change - Original equipment steel foot shift lever with fixed rubber toe peg. Fits 1988-2000 Honda TRX300 FourTrax and TRX300FW 4x4 models. Splines are in good condition; shows...